heres some guides:
Simple Version:
http://forums.pspslimhacks.com/tutor...w-any-psp.html
REALLY DETAILED STEPS:
My thread of some quick hints, tips and more!
How to install 5.00M33-6 on a PSP 1000(PHAT): Code: 1003
Files
Download ChickHEN R2:
ChickHEN Homebrew Enabler R2 for Frimware 5.03 | HEN for PSP-3000, PSP Hacks - PSP Slim Hacks
Download
5.00 OFW and
5.03 OFW:
Official Sony PSP Firmware. Official Firmware for the PSP, PSP Hacks - PSP Slim Hacks
Download Hellcat's Recovery Flasher 1.60:
Hellcat's Recovery Flasher v1.60: Detection of HEN mode, PSP Hacks - PSP Slim Hacks
Required: WinRar or 7Zip or any other zip manager.
i do not take any responsibility if you damage the PSP.
Part 1
You may skip part 1 if you already have 5.03 OFW
Step 1: Extract the 5.03 OFW, put it into your memorystick<PSP<GAME<UPDATE. ms0 is also the same as memory stick.
Step 2: Run the 5.03 OFW, wait for it to finish and DO NOT interrupt the update process.
Part 2: Code: 1004
Now that you have 5.03 OFW in your PSP, its time for ChickHEN R2!
Step 1: Extract the ChickHEN R2 folder, put the h.bin file in the root of your MS(basicly ms0, the first thing when you go to your MS.)
Step 2: Put the extracted PHAT pics into your ms0:/PSP/PHOTOS folder.
Step 3: once you have the photos in, go to your XMB(PSP Dashboard) and go to pictures, memorystick and then go to the chickhen folder. once in, wait for the pics to load and wait.
Step 4: The screen should glitch and become brown, and your PSP should reboot. You are now in ChickHEN R2 mode. To check, go to settings, system settings and system information. it should say 5.03 ChickHEN R2. if not, triy again.
Tip: Press X more than once, say 5 times fast when going to the ChickHEN folder.
You are ready for Part 3, the good part.
Part 3: The M33 Flashing! Code: 1005
Step 1: Once you are in ChickHEN R2 Mode, you can run Hellcat's Recovery Flash 1.60.
-Extract Hellcat's Recovery Flasher 1.60 and put it into ms0:/PSP/GAME/RECOVERY
-Extract the 5.00 OFW and rename it to 500.pbp. then it goes to ms0:/PSP/GAME/RECOVERY
Step 2: Back into the XMB, scroll to game, memorystick and then Hellcat's Recovery Flasher 1.60.
Step 3: Once in Hellcat's Recovery Flasher 1.60, agree to continue. Now select install M33 CFW of the above Firmware. The flashing should start.
-DO NOT STOP ONCE YOU START!
Step 4: Once the flash is done, it may ask you to reboot by pressing any button. do that. You now have 5.00 M33-6 CFW!
After Flash: Some Recommended Settings. Code: 1006
Hold R while you turn your PSP on.
here are the recommended settings that should be under configuration.
UMD Mode set as M33 Driver
Use Vshmenu set as enables
XMB Usb Device: i would always have it set on Memory Stick to be safe
Use M33 network update set as enabled
use version.txt - may want to enable, optional
Speed Up MS access set as ALWAYS
and:
there is an advanced tab/option/samething, select it
after that there is an advanced configuration tab, select it
and from there enable XMB plugins, GAME plugins and POPS plugins.
End of How to install 5.00M33-6 on a PSP 1000(PHAT)